CG Emotron - Low Voltage Variable Speed Drive - Emotron VFX 2.0 -IP20 Series
"Safe and efficient control of movements"
Emotron VFX 2.0 AC drives ensure you get the most out of your cranes, crushers, mills or mixers with full control of the process you will benefit from reliable, cost-efficient and user-friendly operation, protected against damage and downtime. The combination of direct torque control, accurate speed control and efficient vector braking makes Emotron VFX the ideal alternative to costly servo systems and DC motor drives.
- Buil-in EMC Filter (For industrial environment-Category C3)
- Built-in DC Choke
- Advanced Operator panel
- Power Shaft Monitor Function:
A built-in shaft power monitor and a unique load curve protection function protect your process against damage and downtime. The load curve of the controlled equipment is monitored across the entire speed range and any over- or underload situation that could cause inefficiency or damage is detected immediately. - Direct Torque Control:
With this unique Direct Torque Control algorithm, Emotron VFX 2.0 dedects the rapid load changes very quickly (40 Micro sec.) and reacts accordingly. Thus, it eliminates disturbances due to peak loads, abrupt load changes or inaccurately set ramp times. The fast torque response results in safer, more costeffective operation, for example of a crane where frequent and critical starts and stops demand instant high torque, or of a crusher where speed quickly needs to be adjusted to changes in load or type of material. - Speed Autotune controller function:
Emotron VFX has an internal speed controller that increases efficiency. It reacts immediately to load changes that cause deviation in motor speed, and quickly adjusts speed to the set reference value. The controller works without an external feedback and an autotune function reduces set-up time. - Set operation parameters in the units of your specific process, for example m³/s, bar or Pascal.
- Built-in PLC
- Userfriendly Software
| Power Range (Triphase) | 7,5 kW-1400kW |
|---|---|
| Control Method | Scaler (V/Hz) - Direct Torque Control (Vector) |
| Over Loadability Heavy Duty (Current) | %150 for 60 Sec |
| Over Loadability Normal Duty (Current) | %120 for 60 Sec |
| Maximum Output Frequency | 400Hz |
| Digital Inputs/Outputs | 8DI/2DO/3RO |
| Analog Inputs/Outputs | 4AI/2AO |
| Protection Class / Body | IP20 |
| EMOTRON VFX 2.0 IP20/21 Serisi | |||||||||
| 3 AC 400V | |||||||||
| ÜRÜN KODU | Maksimum Çıkış Akımı (A) | NormalŞart (%120, her 10 dakikada 1 dakika) | Ağır Şart (%150, her 10 dakikada 1 dakika) | Kasa Tipi | BOYUTLAR(mm) YükseklikXGenişlikXDerinlik | Ağırlık (kg) | Hava Akışı (m³/h) | ||
| GÜÇ (KW) | Nominal Akım(A) | GÜÇ (KW) | Nominal Akım(A) | ||||||
| VFX48-025 | 38 | 11 | 25 | 7,5 | 20 | C2 | 446(530)x176x266 | 17 | 120 |
| VFX48-030 | 45 | 15 | 30 | 11 | 24 | C2 | 446(530)x176x266 | 17 | 120 |
| VFX48-036 | 54 | 18,5 | 36 | 15 | 29 | C2 | 446(530)x176x266 | 17 | 170 |
| VFX48-045 | 68 | 22 | 45 | 18,5 | 36 | C2 | 446(530)x176x266 | 17 | 170 |
| VFX48-060 | 90 | 30 | 60 | 22 | 48 | D2 | 545(630)x220x282 | 30 | 170 |
| VFX48-072 | 108 | 37 | 72 | 30 | 58 | D2 | 545(630)x220x282 | 30 | 170 |
| VFX48-088 | 132 | 45 | 88 | 37 | 70 | D2 | 545(630)x220x282 | 30 | 170 |
| VFX48-106 | 127 | 55 | 106 | 45 | 85 | E2 | 952/952x275x313 | 53 | 510 |
| VFX48-142 | 170 | 75 | 142 | 55 | 114 | E2 | 952/952x275x313 | 53 | 510 |
| VFX48-171 | 205 | 90 | 171 | 75 | 137 | E2 | 952/952x275x313 | 53 | 510 |
| VFX48-205 | 246 | 110 | 205 | 90 | 164 | F2 | 952/952x335x313 | 68 | 800 |
| VFX48-244 | 293 | 132 | 244 | 110 | 195 | F2 | 952/952x335x313 | 68 | 800 |
| VFX 2.0 IP20 (PEBB) Series | |||||||||
| VFX48-300 | 360 | 160 | 300 | 132 | 240 | G(2) | 1036x500x390 | 140 | 1020 |
| VFX48-375 | 450 | 200 | 375 | 160 | 300 | G(2) | 1036x500x390 | 140 | 1020 |
| VFX48-430 | 516 | 220 | 430 | 200 | 344 | H(2) | 1036x500x450 | 170 | 1600 |
| VFX48-500 | 600 | 250 | 500 | 220 | 400 | H(2) | 1036x500x450 | 170 | 1600 |
| VFX48-600 | 720 | 315 | 600 | 250 | 480 | I(3) | 1036x730x450 | 248 | 2400 |
| VFX48-650 | 780 | 355 | 650 | 315 | 520 | I(3) | 1036x730x450 | 248 | 2400 |
| VFX48-750 | 900 | 400 | 750 | 355 | 600 | I(3) | 1036x730x450 | 248 | 2400 |
| VFX48-860 | 1032 | 450 | 860 | 400 | 688 | J(4) | 1036x1100x450 | 340 | 3200 |
| VFX48-1KO | 1200 | 560 | 1000 | 450 | 800 | J(4) | 1036x1100x450 | 340 | 3200 |
| VFX48-1K15 | 1380 | 630 | 1150 | 500 | 920 | KA(5) | 1036x1365x450 | 418 | 4000 |
| VFX48-1K25 | 1500 | 710 | 1250 | 560 | 1000 | KA(5) | 1036x1365x450 | 418 | 4000 |
| VFX48-1K35 | 1620 | 710 | 1350 | 600 | 1080 | K(6) | 1036x1630x450 | 496 | 4800 |
| VFX48-1K5 | 1800 | 800 | 1500 | 630 | 1200 | K(6) | 1036x1630x450 | 496 | 4800 |
| VFX48-1K75 | 2100 | 900 | 1750 | 800 | 1400 | L(7) | 1036x2000x450 | 588 | 5600 |
| VFX48-2K0 | 2400 | 1120 | 2000 | 900 | 1600 | M(8) | 1036x2230x450 | 666 | 6400 |
| VFX48-2K25 | 2700 | 1250 | 2250 | 1000 | 1800 | N(9) | 1036x2530x450 | 744 | 7200 |
| VFX48-2K5 | 3000 | 1400 | 2500 | 1120 | 2000 | 0(10) | 1036x2830x450 | 836 | 8000 |
- Cranes
- Ball Mills
- Crushers
- Mixers
-
There is no Document to download.
-
There is no Software to download.
